Browsing 2019 by Title

Sort by: Order: Results:

  • Comparative Analysis of Thermodynamic Performance of a Cascade Refrigerantion System for Refrigerant Couple (R717-R744) & (R290-R744) 
    Nhavi, Ajay; Dave, Hiteshkumar (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-6 | Issue-4, 2019-04)
    Present time Global warming is many effect to environment and uses of High refrigerant use in Refrigerant system more harmful effect on environment. In this project, compare Natural refrigerant pair(R717-R744) & (R290-R744) ...
  • Comparative Study Of Conventional Retaining Wall And Mechanically Stabilized Earth Wall Using Plaxis 2d 
    Qureshi, Naved; Patel, Arpita; Kamdar, Bhoomi (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-4, 2019-04)
    Mechanically Stabilized Earth (MSE) wall system is retention system used for highway design. In conventional system, cast in place concrete structure is used that cannot accommodate significant differential settlement ...
  • A comparative study of electrochemical degradation of benzoic acid and terephthalic acid from aqueous solution of purified terephthalic acid (PTA) wastewater 
    Sandhwar, Vishal Kumar; Prasad, Basheshwar (Journal of Water Process Engineering | Volume 30, 2019-08)
    In this article, studies have been performed on the treatment of benzoic acid (BA), terephthalic acid (TPA) and COD from synthetic binary solution of PTA wastewater. Acid precipitation pretreatment of aqueous solution was ...
  • COMPARISON BETWEEN PILE AND COMBINED PILED RAFT FOUNDATION 
    Mishra, Shweta; Mistry, Renisha (International Research Journal of Engineering and Technology | Volume-6 | Issue-5, 2019-05)
    The important question related to the design of high-rise buildings on the settlement-sensitive soil (clays) is the cost-optimised reduction of settlements to minimise possible damage and to reduce deformations of high-rise ...
  • Compensative Review Approach on Glaucoma Detection Techniques 
    Patel, Vibhuti; Chaudhari, Donika (International Journal of Innovative Research in Science, Engineering and Technology | Volume-8 | Issue-12, 2019-12)
    There are several papers are available on different types for glaucoma detection. Here we are trying to understand possible some techniques and try to represent compensative approach on different detection techniques such ...
  • A Critical Appraisal of Mode Choice Model of Work Trips 
    Javeed, Faizi Ahmad; Jayeshn.R, Juremalani; Sanket, Bagadia; Dharmesh, Juremalani (International Journal of Engineering and Advanced Technology | Volume-9 | Issue-1, 2019-10)
    In the present scenario in world, many mode choice models have been developed to predict the travelers mode choice in the available modes of transportation system .The mode choice model is one of a very significantcomponent ...
  • Design and Analysis of Ring Oscillator CMOS circuit at 65 nm Technology 
    Mehta, Nauneet Kumar; Kakde, Bhagwat; Gupta, Ramji; Chourasia, Bharti (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-2, 2019-06)
    The Ring oscillator is a very compact device compared to other oscillators. There are many advantages of ring oscillator i.e. contain the low area, high speed. A ring oscillator is a device composed of an odd number of NOT ...
  • Different methods of air conditioning without compressor 
    Bhuva, Ankit; Khare, Manjeet; Katira, Harsh; Ajudiya, Urvish; Bhavsar, Shivansh (JETIR | Volume-6 | Issue-3, 2019-03)
    Now a days due to pollution global warming effect is increasing because of that demand of air conditioning system increases, in conventional vapour compressor uses more power so the requirement of electricity increases ...
  • Experiment and analysis of comparison between standard vcrs & vcrs with ejector system 
    Patel, Devarshi; Khare, Manjeet; Patel, Kunj; Parmar, Nirmesh; Patel, Krushit (JETIR | Volume-6 | Issue-2, 2019-04)
    As we know that an expansion device is used in standard vapor compression refrigeration system between the condenser and the evaporator, due to this there are losses to be found in expansion process that is loss in kinetic ...
  • Experimental Analysis of Parabolic Concentrator Automatic Solar Tracking System 
    Parmar, Kamlesh R; Patel, Purvesh A; Dave, Hitesh N (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-6 | Issue-4, 2019-04)
    Due to the energetic problems which society has been facing, the development of technologies to increase the efficiency of solar systems is of paramount importance. The solar concentration enables the concentration of solar ...
  • Factor Affecting Labour Productivity In Building Construction 
    Jagtap, Dhaval; Tidke, Anuja (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-6 | Issue-3, 2019-03)
    Productivity plays an important role in the construction industry. Productivity is one of the most important issues in both developed and developing countries. Efficient management of construction resources can lead to ...
  • Implementation of lobst on to the repetitive type of housing project: a case study. 
    Purohit, Aalap H.; Phugat, Sumit; Upadhyaya, Deep S. (JETIR | Volume-6 | Issue-3, 2019-03)
    LOBST is used for the repetitive and non-repetitive type of construction or manufacturing project. This method is most satisfactory method for the planning of repetitive task but for the immense popularity of the network ...
  • Influence of Chemical Admixture on Marine Soil 
    Solanki, Manisha; Kamdar, Bhoomi; Shah, Manish (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-3, 2019-03)
    When soil looses the moisture content below the ground, it is create the volume reduction in the soil and cause the shrinkage cracks on the soil surface. This condition creates moderate to several problematic damage to the ...
  • Measuring Speed Variation Based On Vehicle Movement Mechanism At Signalized Intersection By Probe Vehicle Data Under Heterogeneous Traffic Condition: A Case Study In Surat City 
    Juremalani, Jayesh; Brahmbhatt, Anand (JETIR | Volume-6 | Issue-4, 2019-04)
    Intersection is an important point in a road network and there are numbers of intersection in Surat city. The prime objective of traffic signal control is to minimize vehicular conflict and delay. Speed is inversely ...
  • Modification of Temperature Correction Factor in Fwd Based On Field Experience in Indian Context 
    Garasia, Kevin; Juremalani, Jayesh (International Journal of Civil Engineering and Technology (IJCIET) | Volume-10 | Issue-4, 2019-04)
    Recently flexible pavements are evaluated by Falling Weight Deflectometer (FWD) instead of Benkelbeam method because of several advantages. Now pavement temperature is one of the most important parameters that influence ...
  • Numerical Analysis of The Slope By GEO5 
    Patel, Ekta; Kamdar, Bhoomi; Joshi, Nitin (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-3, 2019-03)
    failure of the slope often costs lives as well as property. Numerical simulation performed with GEO 5 software to know the influence of anchor for slope stability by traditional Limit Equilibrium method; Bishop’s method. ...
  • ON-STREET PARKING PROBLEMS IN CBD AREA & REMEDIEL MEASURES-A CASE STUDY OF GODHRA CITY 
    Gandhi, Naitik; Juremalani, Jayesh (International Journal of Civil Engineering and Technology (IJCIET) | Volume 10 | Issue 03, 2019-03)
    The unprecedented growth of vehicles has increased parking space demand into cities. It has a considerable effect on transportation development in the city. The availability of less space in urban areas has rising demand ...
  • Optimal green energy source selection: An eclectic decision 
    Bhowmik, Chiranjib; Bhowmik, Sumit; Ray, Amitava (Energy & Environment | Volume 31 | Issue 5, 2019-10)
    Various researchers have suggested many qualitative and quantitative criteria for green energy management, which are mostly operational in nature and specific to a particular application. The main aim of this investigation ...
  • Parametric analysis for the development of copper silicon Carbide metal matrix composites using stir casting 
    Goyal, Bhupesh; Basak, Deepjyoti; Vyas, Arjun; Sodha, Dhavalsinh; Khanna, Prashant (GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES | Volume-6 | Issue-6, 2019-06)
    Smart materials are in picture due to the requirement of light weight and high strength material having good mechanical properties for different application. Copper material composite acquire all the requirement properties ...
  • Parametric uncertainty quantification in natural frequency of sandwich plates using polynomial neural network 
    Karsh, P. K.; Raturi, H. P.; Kumar, R. R.; Dey, S. (National Conference on Advanced Materials and Applications | Volume- | Issue-, 2020)
    In this paper, uncertainty quantification in natural frequencies for laminated soft core sandwich plates is presented by employing finite element (FE) coupled polynomial neural network (PNN) approach. The computational ...

Search DSpace


Advanced Search

Browse

My Account