Browsing 2019 by Issue Date

Sort by: Order: Results:

  • Prajapati, Krutika (International Journal of Engineering Development and Research | Volume-7 | Issue-3, 2019)
    Current annual production of fly ash, a byproduct from coal based thermal power plant (TPPS) is 131 million tonnes (MT).some of the problems associated with fly ash are large area of land required for disposal and toxicity ...
  • Nihalani, Seema; Joshi, Unnati; Meeruty, Ashish (Materials Science Forum | Volume-969, 2019)
    Smart materials are the most significant in terms of technology in 21st-century. "Smart Materials" have a crucial role in construction technology. These innovative materials constitute an important part of smart building ...
  • Gandhi, Naitik; Juremalani, Jayesh (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    There are many downsides on traffic in our country however major downside of accelerating traffic jam is undisciplined parking tends to Parking Deficiency It increase Congestion. With the rise in variety of vehicles, the ...
  • Gadhavi, Kajal; Juremalani, Jayesh (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    Mastic asphalt is a gap graded asphalt mixture which can be used in surface layer of high volume pavements, wearing surface for bridge decks, etc…. Due to recent problem of pavement failure at intersection, bridge deck, ...
  • Patel, Snehal; Juremalani, Jayesh; Parekh, Vilin (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    Buses are the most widely utilized in transit technology these days due to the fact bus networks are easily handy and cheaper than other kinds of public transportation. Bus route problem is major challenge now a day because ...
  • Mahavar, Vaishali; Juremalani, Jayesh; Mehmood, Khalid (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    In India it is planned to develop all small and big cities as smart cities. For which proper planning of surface transport system is a primary requirement. Modern technology is to be adopted for connecting internal roads ...
  • Garasia, Kevin; Juremalani, Jayesh (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    FWD is used to evaluate the physical properties of the pavement. FWD is primarily used to estimate pavement structural capacity for overlay design and to determine, if a pavement is being overloaded. The equipment is highly ...
  • Dadi, Mohsin J.; Vyas, Arjun K.; Sodha, Dhaval R. (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-1, 2019-01)
    Energy is the heart of the modern world. This paper provides a detailed review of solar photovoltaic and concentrated solar power technologies. The status of solar photovoltaic technology being commercially developed, ...
  • Purohit, Aalap H.; Phugat, Sumit; Upadhaya, D. S. (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    This paper reports one aspect of a Repetitive Scheduling Method (RSM) or Line of Balance Scheduling Technique (LOBST) applied for a housing project having project activities repetitive in nature. These scheduling methods ...
  • Dadi, Mohsin J.; Vyas, Arjun K.; Sodha, Dhaval R. (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-1, 2019-01)
    Energy is the heart of the modern world. This paper provides a detailed review of solar photovoltaic and concentrated solar power technologies. The status of solar photovoltaic technology being commercially developed, ...
  • Shukla, Gangesh; Raval, Karmit; Solanki, Dhruvi; Patel, Urvashi; Dave, Dhaval (International Research Journal of Engineering and Technology (IRJET) | Volume-6 | Issue-2, 2019-02)
    This paper presents a study on campus-friendly solar powered electric vehicle. Solar energy is one of the important sources of renewable energy which can be a feasible alternative to fossil fuels. On a bright sunny day the ...
  • Patel, Ekta; Kamdar, Bhoomi; Joshi, Nitin (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-3, 2019-03)
    failure of the slope often costs lives as well as property. Numerical simulation performed with GEO 5 software to know the influence of anchor for slope stability by traditional Limit Equilibrium method; Bishop’s method. ...
  • Parmar, Chirag; Gajjar, Rital (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-03)
    Electrical Vehicle (EVs) have recently attracted considerable attention and so did the development of battery technologies. Although the battery technology has been significantly advanced, the available batteries do not ...
  • Solanki, Manisha; Kamdar, Bhoomi; Shah, Manish (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-3, 2019-03)
    When soil looses the moisture content below the ground, it is create the volume reduction in the soil and cause the shrinkage cracks on the soil surface. This condition creates moderate to several problematic damage to the ...
  • Kulkarni, Pavan; Tomar, Prashantsingh; khanna, Prashant (JETIR | Volume-6 | Issue-3, 2019-03)
    Lean concept has existed since the late 1970s. From right off the bat, numerous organizations in industrialized nations connected lean concept more viably than others. Fruitful Lean execution is regularly ascribed to ...
  • Patel, Parth; Khare, Manjeet; Parmar, Smit; Parmar, Nishant; Lad, Hardik (JETIR | Volume-6 | Issue-3, 2019-03)
    In this paper the creation of model of Savonius type Vertical Axis Wind Turbine (VAWT) is made utilizing materials which are effectively accessible like half cut shaped metal sheet, dc generator, solar plate, and so forth. ...
  • Chimta, Panahali; Khare, Manjeet; Khan, Shadab; Khan, Farhan; Tomar, Prashant Singh (JETIR | Volume-6 | Issue-3, 2019-03)
    The authors studied various techniques that promoted heat transfer rate and to decrease size and cost of equipment of heat exchanger to upgrade the heat transfer rate. One the most important tool used in passive heat ...
  • Jagtap, Dhaval; Tidke, Anuja (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-6 | Issue-3, 2019-03)
    Productivity plays an important role in the construction industry. Productivity is one of the most important issues in both developed and developing countries. Efficient management of construction resources can lead to ...
  • Ghanchibhai, Salman F.; Rasoolbhai, Iliyas U.; Pandya, Tejas H. (JETIR | Volume-6 | Issue-3, 2019-03)
    Concrete is widely used material in construction of infrastructures like building, dams, bridges ,roads ,runway etc. In present day construction industry having big role in pollution of environment. Different materials are ...
  • Bhuva, Ankit; Khare, Manjeet; Katira, Harsh; Ajudiya, Urvish; Bhavsar, Shivansh (JETIR | Volume-6 | Issue-3, 2019-03)
    Now a days due to pollution global warming effect is increasing because of that demand of air conditioning system increases, in conventional vapour compressor uses more power so the requirement of electricity increases ...

Search DSpace


Advanced Search

Browse

My Account