• ON-STREET PARKING PROBLEMS IN CBD AREA & REMEDIEL MEASURES-A CASE STUDY OF GODHRA CITY 

  Gandhi, Naitik; Juremalani, Jayesh (International Journal of Civil Engineering and Technology (IJCIET) | Volume 10 | Issue 03, 2019-03)

  The unprecedented growth of vehicles has increased parking space demand into cities. It has a considerable effect on transportation development in the city. The availability of less space in urban areas has rising demand ...
• Optimal green energy source selection: An eclectic decision 

  Bhowmik, Chiranjib; Bhowmik, Sumit; Ray, Amitava (Energy & Environment | Volume 31 | Issue 5, 2019-10)

  Various researchers have suggested many qualitative and quantitative criteria for green energy management, which are mostly operational in nature and specific to a particular application. The main aim of this investigation ...
• SOLAR POWER TECHNOLOGIES, REFRIGERATION AND COOLING SYSTEMS – REVIEW 

  Dadi, Mohsin J.; Vyas, Arjun K.; Sodha, Dhaval R. (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-1, 2019-01)

  Energy is the heart of the modern world. This paper provides a detailed review of solar photovoltaic and concentrated solar power technologies. The status of solar photovoltaic technology being commercially developed, ...
• A comparative study of electrochemical degradation of benzoic acid and terephthalic acid from aqueous solution of purified terephthalic acid (PTA) wastewater 

  Sandhwar, Vishal Kumar; Prasad, Basheshwar (Journal of Water Process Engineering | Volume 30, 2019-08)

  In this article, studies have been performed on the treatment of benzoic acid (BA), terephthalic acid (TPA) and COD from synthetic binary solution of PTA wastewater. Acid precipitation pretreatment of aqueous solution was ...
• Thermal Analysis of Car Roof to control Heat Formation 

  Cinemawala, Abrar; Choudhry, Amit; Savalia, Dainik; Parikh, Maulesh (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-2, 2019-06)

  Thermal comfort is the prime focus of the present work. Simulations are carried over external surface of car roof to determine the Heat Transfer Rate by means of virtual environment with the help of commercial tool. The ...
• Implementation of lobst on to the repetitive type of housing project: a case study. 

  Purohit, Aalap H.; Phugat, Sumit; Upadhyaya, Deep S. (JETIR | Volume-6 | Issue-3, 2019-03)

  LOBST is used for the repetitive and non-repetitive type of construction or manufacturing project. This method is most satisfactory method for the planning of repetitive task but for the immense popularity of the network ...
• A review on various insertion techniques in double pipe heat exchanger 

  Chimta, Panahali; Khare, Manjeet; Khan, Shadab; Khan, Farhan; Tomar, Prashant Singh (JETIR | Volume-6 | Issue-3, 2019-03)

  The authors studied various techniques that promoted heat transfer rate and to decrease size and cost of equipment of heat exchanger to upgrade the heat transfer rate. One the most important tool used in passive heat ...
• Design and Analysis of Ring Oscillator CMOS circuit at 65 nm Technology 

  Mehta, Nauneet Kumar; Kakde, Bhagwat; Gupta, Ramji; Chourasia, Bharti (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-2, 2019-06)

  The Ring oscillator is a very compact device compared to other oscillators. There are many advantages of ring oscillator i.e. contain the low area, high speed. A ring oscillator is a device composed of an odd number of NOT ...
• Factor Affecting Labour Productivity In Building Construction 

  Jagtap, Dhaval; Tidke, Anuja (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-6 | Issue-3, 2019-03)

  Productivity plays an important role in the construction industry. Productivity is one of the most important issues in both developed and developing countries. Efficient management of construction resources can lead to ...
• Parametric analysis for the development of copper silicon Carbide metal matrix composites using stir casting 

  Goyal, Bhupesh; Basak, Deepjyoti; Vyas, Arjun; Sodha, Dhavalsinh; Khanna, Prashant (GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES | Volume-6 | Issue-6, 2019-06)

  Smart materials are in picture due to the requirement of light weight and high strength material having good mechanical properties for different application. Copper material composite acquire all the requirement properties ...
• Review of Lean Tools Application in Reduction of Throughput Time of Current Transformer 

  Kulkarni, Pavan; Tomar, Prashantsingh; khanna, Prashant (JETIR | Volume-6 | Issue-3, 2019-03)

  Lean concept has existed since the late 1970s. From right off the bat, numerous organizations in industrialized nations connected lean concept more viably than others. Fruitful Lean execution is regularly ascribed to ...
• Production of electricity by small scale vertical axis wind turbine (vawt) and solar plate on highways and railway junctions 

  Patel, Parth; Khare, Manjeet; Parmar, Smit; Parmar, Nishant; Lad, Hardik (JETIR | Volume-6 | Issue-3, 2019-03)

  In this paper the creation of model of Savonius type Vertical Axis Wind Turbine (VAWT) is made utilizing materials which are effectively accessible like half cut shaped metal sheet, dc generator, solar plate, and so forth. ...
• Different methods of air conditioning without compressor 

  Bhuva, Ankit; Khare, Manjeet; Katira, Harsh; Ajudiya, Urvish; Bhavsar, Shivansh (JETIR | Volume-6 | Issue-3, 2019-03)

  Now a days due to pollution global warming effect is increasing because of that demand of air conditioning system increases, in conventional vapour compressor uses more power so the requirement of electricity increases ...
• Experiment and analysis of comparison between standard vcrs & vcrs with ejector system 

  Patel, Devarshi; Khare, Manjeet; Patel, Kunj; Parmar, Nirmesh; Patel, Krushit (JETIR | Volume-6 | Issue-2, 2019-04)

  As we know that an expansion device is used in standard vapor compression refrigeration system between the condenser and the evaporator, due to this there are losses to be found in expansion process that is loss in kinetic ...
• A review paper on use of recycled concrete aggregate in concrete 

  Ghanchibhai, Salman F.; Rasoolbhai, Iliyas U.; Pandya, Tejas H. (JETIR | Volume-6 | Issue-3, 2019-03)

  Concrete is widely used material in construction of infrastructures like building, dams, bridges ,roads ,runway etc. In present day construction industry having big role in pollution of environment. Different materials are ...
• Measuring Speed Variation Based On Vehicle Movement Mechanism At Signalized Intersection By Probe Vehicle Data Under Heterogeneous Traffic Condition: A Case Study In Surat City 

  Juremalani, Jayesh; Brahmbhatt, Anand (JETIR | Volume-6 | Issue-4, 2019-04)

  Intersection is an important point in a road network and there are numbers of intersection in Surat city. The prime objective of traffic signal control is to minimize vehicular conflict and delay. Speed is inversely ...
• Compensative Review Approach on Glaucoma Detection Techniques 

  Patel, Vibhuti; Chaudhari, Donika (International Journal of Innovative Research in Science, Engineering and Technology | Volume-8 | Issue-12, 2019-12)

  There are several papers are available on different types for glaucoma detection. Here we are trying to understand possible some techniques and try to represent compensative approach on different detection techniques such ...
• PV, Battery and Ultra-capacitor based Energy Management Concept in Electric Vehicle 

  Parmar, Chirag; Gajjar, Rital (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-03)

  Electrical Vehicle (EVs) have recently attracted considerable attention and so did the development of battery technologies. Although the battery technology has been significantly advanced, the available batteries do not ...
• Influence of Chemical Admixture on Marine Soil 

  Solanki, Manisha; Kamdar, Bhoomi; Shah, Manish (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-3, 2019-03)

  When soil looses the moisture content below the ground, it is create the volume reduction in the soil and cause the shrinkage cracks on the soil surface. This condition creates moderate to several problematic damage to the ...
• Review of Formal Development of Lobst Method 

  Purohit, Aalap H.; Phugat, Sumit; Upadhaya, D. S. (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)

  This paper reports one aspect of a Repetitive Scheduling Method (RSM) or Line of Balance Scheduling Technique (LOBST) applied for a housing project having project activities repetitive in nature. These scheduling methods ...

View more