Browsing 2019 by Title

Sort by: Order: Results:

  • Patel, Devarshi; Khare, Manjeet; Patel, Kunj; Parmar, Nirmesh; Patel, Krushit (JETIR | Volume-6 | Issue-2, 2019-04)
    As we know that an expansion device is used in standard vapor compression refrigeration system between the condenser and the evaporator, due to this there are losses to be found in expansion process that is loss in kinetic ...
  • Parmar, Kamlesh R; Patel, Purvesh A; Dave, Hitesh N (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-6 | Issue-4, 2019-04)
    Due to the energetic problems which society has been facing, the development of technologies to increase the efficiency of solar systems is of paramount importance. The solar concentration enables the concentration of solar ...
  • Jagtap, Dhaval; Tidke, Anuja (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-6 | Issue-3, 2019-03)
    Productivity plays an important role in the construction industry. Productivity is one of the most important issues in both developed and developing countries. Efficient management of construction resources can lead to ...
  • Purohit, Aalap H.; Phugat, Sumit; Upadhyaya, Deep S. (JETIR | Volume-6 | Issue-3, 2019-03)
    LOBST is used for the repetitive and non-repetitive type of construction or manufacturing project. This method is most satisfactory method for the planning of repetitive task but for the immense popularity of the network ...
  • Solanki, Manisha; Kamdar, Bhoomi; Shah, Manish (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-3, 2019-03)
    When soil looses the moisture content below the ground, it is create the volume reduction in the soil and cause the shrinkage cracks on the soil surface. This condition creates moderate to several problematic damage to the ...
  • Juremalani, Jayesh; Brahmbhatt, Anand (JETIR | Volume-6 | Issue-4, 2019-04)
    Intersection is an important point in a road network and there are numbers of intersection in Surat city. The prime objective of traffic signal control is to minimize vehicular conflict and delay. Speed is inversely ...
  • Garasia, Kevin; Juremalani, Jayesh (International Journal of Civil Engineering and Technology (IJCIET) | Volume-10 | Issue-4, 2019-04)
    Recently flexible pavements are evaluated by Falling Weight Deflectometer (FWD) instead of Benkelbeam method because of several advantages. Now pavement temperature is one of the most important parameters that influence ...
  • Patel, Ekta; Kamdar, Bhoomi; Joshi, Nitin (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-3, 2019-03)
    failure of the slope often costs lives as well as property. Numerical simulation performed with GEO 5 software to know the influence of anchor for slope stability by traditional Limit Equilibrium method; Bishop’s method. ...
  • Gandhi, Naitik; Juremalani, Jayesh (International Journal of Civil Engineering and Technology (IJCIET) | Volume 10 | Issue 03, 2019-03)
    The unprecedented growth of vehicles has increased parking space demand into cities. It has a considerable effect on transportation development in the city. The availability of less space in urban areas has rising demand ...
  • Bhowmik, Chiranjib; Bhowmik, Sumit; Ray, Amitava (Energy & Environment | Volume 31 | Issue 5, 2019-10)
    Various researchers have suggested many qualitative and quantitative criteria for green energy management, which are mostly operational in nature and specific to a particular application. The main aim of this investigation ...
  • Goyal, Bhupesh; Basak, Deepjyoti; Vyas, Arjun; Sodha, Dhavalsinh; Khanna, Prashant (GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES | Volume-6 | Issue-6, 2019-06)
    Smart materials are in picture due to the requirement of light weight and high strength material having good mechanical properties for different application. Copper material composite acquire all the requirement properties ...
  • Karsh, P. K.; Raturi, H. P.; Kumar, R. R.; Dey, S. (National Conference on Advanced Materials and Applications | Volume- | Issue-, 2020)
    In this paper, uncertainty quantification in natural frequencies for laminated soft core sandwich plates is presented by employing finite element (FE) coupled polynomial neural network (PNN) approach. The computational ...
  • Patel, Parth; Khare, Manjeet; Parmar, Smit; Parmar, Nishant; Lad, Hardik (JETIR | Volume-6 | Issue-3, 2019-03)
    In this paper the creation of model of Savonius type Vertical Axis Wind Turbine (VAWT) is made utilizing materials which are effectively accessible like half cut shaped metal sheet, dc generator, solar plate, and so forth. ...
  • Parmar, Chirag; Gajjar, Rital (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-03)
    Electrical Vehicle (EVs) have recently attracted considerable attention and so did the development of battery technologies. Although the battery technology has been significantly advanced, the available batteries do not ...
  • Purohit, Aalap H.; Phugat, Sumit; Upadhaya, D. S. (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    This paper reports one aspect of a Repetitive Scheduling Method (RSM) or Line of Balance Scheduling Technique (LOBST) applied for a housing project having project activities repetitive in nature. These scheduling methods ...
  • Kulkarni, Pavan; Tomar, Prashantsingh; khanna, Prashant (JETIR | Volume-6 | Issue-3, 2019-03)
    Lean concept has existed since the late 1970s. From right off the bat, numerous organizations in industrialized nations connected lean concept more viably than others. Fruitful Lean execution is regularly ascribed to ...
  • Garasia, Kevin; Juremalani, Jayesh (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    FWD is used to evaluate the physical properties of the pavement. FWD is primarily used to estimate pavement structural capacity for overlay design and to determine, if a pavement is being overloaded. The equipment is highly ...
  • Patel, Snehal; Juremalani, Jayesh; Parekh, Vilin (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    Buses are the most widely utilized in transit technology these days due to the fact bus networks are easily handy and cheaper than other kinds of public transportation. Bus route problem is major challenge now a day because ...
  • Prajapati, Krutika (International Journal of Engineering Development and Research | Volume-7 | Issue-3, 2019)
    Current annual production of fly ash, a byproduct from coal based thermal power plant (TPPS) is 131 million tonnes (MT).some of the problems associated with fly ash are large area of land required for disposal and toxicity ...
  • Mahavar, Vaishali; Juremalani, Jayesh; Mehmood, Khalid (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    In India it is planned to develop all small and big cities as smart cities. For which proper planning of surface transport system is a primary requirement. Modern technology is to be adopted for connecting internal roads ...

Search DSpace


Advanced Search

Browse

My Account