Faculty of Engineering & Technology: Recent submissions

  • Performance and Emission Parameters with Blending of Jatropha Biodiesel in Diesel Engine 
    Gupta, Ravindra; Vashi, Omkamal; Bhatt, Vaibhav (International Journal of Recent Technology and Engineering (IJRTE) | Volume-8 | Issue-5, 2020-01)
    In the current situation limited resources of petroleum products and their higher consumption rate and pollution increase research work for an alternative option for internal combustion engines. The emissions draws from ...
  • Thermal Analysis of Car Roof to control Heat Formation 
    Cinemawala, Abrar; Choudhry, Amit; Savalia, Dainik; Parikh, Maulesh (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-2, 2019-06)
    Thermal comfort is the prime focus of the present work. Simulations are carried over external surface of car roof to determine the Heat Transfer Rate by means of virtual environment with the help of commercial tool. The ...
  • Detection of Acted Happy Emotion using Facial Patches 
    Singh, Parth R.; Panchal, Nisha A. (International Journal of Recent Technology and Engineering (IJRTE) | Volume-8 | Issue-5, 2020-01)
    Facial Recognition is done to extract emotion of the face. This Paper aims to check that emotion is acted or real expression. For this paper dataset is created for the targeted purpose. The recognition of emotion is acted ...
  • Implementation of lobst on to the repetitive type of housing project: a case study. 
    Purohit, Aalap H.; Phugat, Sumit; Upadhyaya, Deep S. (JETIR | Volume-6 | Issue-3, 2019-03)
    LOBST is used for the repetitive and non-repetitive type of construction or manufacturing project. This method is most satisfactory method for the planning of repetitive task but for the immense popularity of the network ...
  • A review on various insertion techniques in double pipe heat exchanger 
    Chimta, Panahali; Khare, Manjeet; Khan, Shadab; Khan, Farhan; Tomar, Prashant Singh (JETIR | Volume-6 | Issue-3, 2019-03)
    The authors studied various techniques that promoted heat transfer rate and to decrease size and cost of equipment of heat exchanger to upgrade the heat transfer rate. One the most important tool used in passive heat ...
  • An Efficient Resource Provisioned Technique in Cloud Computing Environment 
    Shah, Jaimeel; Patel, Chirag (International Journal of Innovative Technology and Exploring Engineering (IJITEE) | Volume-9 | Issue-3, 2020-01)
    Different ICT-empowered service providers additionally have either embraced distributed computing or began moving administrations to cloud framework. Be that as it may, the expanding interest for cloud based foundation has ...
  • Design and Analysis of Ring Oscillator CMOS circuit at 65 nm Technology 
    Mehta, Nauneet Kumar; Kakde, Bhagwat; Gupta, Ramji; Chourasia, Bharti (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-2, 2019-06)
    The Ring oscillator is a very compact device compared to other oscillators. There are many advantages of ring oscillator i.e. contain the low area, high speed. A ring oscillator is a device composed of an odd number of NOT ...
  • Factor Affecting Labour Productivity In Building Construction 
    Jagtap, Dhaval; Tidke, Anuja (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-6 | Issue-3, 2019-03)
    Productivity plays an important role in the construction industry. Productivity is one of the most important issues in both developed and developing countries. Efficient management of construction resources can lead to ...
  • Parametric analysis for the development of copper silicon Carbide metal matrix composites using stir casting 
    Goyal, Bhupesh; Basak, Deepjyoti; Vyas, Arjun; Sodha, Dhavalsinh; Khanna, Prashant (GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES | Volume-6 | Issue-6, 2019-06)
    Smart materials are in picture due to the requirement of light weight and high strength material having good mechanical properties for different application. Copper material composite acquire all the requirement properties ...
  • Review of Lean Tools Application in Reduction of Throughput Time of Current Transformer 
    Kulkarni, Pavan; Tomar, Prashantsingh; khanna, Prashant (JETIR | Volume-6 | Issue-3, 2019-03)
    Lean concept has existed since the late 1970s. From right off the bat, numerous organizations in industrialized nations connected lean concept more viably than others. Fruitful Lean execution is regularly ascribed to ...
  • Production of electricity by small scale vertical axis wind turbine (vawt) and solar plate on highways and railway junctions 
    Patel, Parth; Khare, Manjeet; Parmar, Smit; Parmar, Nishant; Lad, Hardik (JETIR | Volume-6 | Issue-3, 2019-03)
    In this paper the creation of model of Savonius type Vertical Axis Wind Turbine (VAWT) is made utilizing materials which are effectively accessible like half cut shaped metal sheet, dc generator, solar plate, and so forth. ...
  • Different methods of air conditioning without compressor 
    Bhuva, Ankit; Khare, Manjeet; Katira, Harsh; Ajudiya, Urvish; Bhavsar, Shivansh (JETIR | Volume-6 | Issue-3, 2019-03)
    Now a days due to pollution global warming effect is increasing because of that demand of air conditioning system increases, in conventional vapour compressor uses more power so the requirement of electricity increases ...
  • Experiment and analysis of comparison between standard vcrs & vcrs with ejector system 
    Patel, Devarshi; Khare, Manjeet; Patel, Kunj; Parmar, Nirmesh; Patel, Krushit (JETIR | Volume-6 | Issue-2, 2019-04)
    As we know that an expansion device is used in standard vapor compression refrigeration system between the condenser and the evaporator, due to this there are losses to be found in expansion process that is loss in kinetic ...
  • A review paper on use of recycled concrete aggregate in concrete 
    Ghanchibhai, Salman F.; Rasoolbhai, Iliyas U.; Pandya, Tejas H. (JETIR | Volume-6 | Issue-3, 2019-03)
    Concrete is widely used material in construction of infrastructures like building, dams, bridges ,roads ,runway etc. In present day construction industry having big role in pollution of environment. Different materials are ...
  • Comparison between Stability and Flow Value Using Aggregates With Require Gradation and Aggregates Failed In Flakiness and Elongation (40 % Flaky Particles) 
    Mehta, Ritu; Gurjar, Avinash; Juremalani, Jayesh (JETIR | Volume-5 | Issue-4, 2018-04)
    This study has been undertaken to investigate the determination of Comparison between stability and flow value using Marshall Mix design method with required gradation and the aggregates which are failed in specify gradation ...
  • Measuring Speed Variation Based On Vehicle Movement Mechanism At Signalized Intersection By Probe Vehicle Data Under Heterogeneous Traffic Condition: A Case Study In Surat City 
    Juremalani, Jayesh; Brahmbhatt, Anand (JETIR | Volume-6 | Issue-4, 2019-04)
    Intersection is an important point in a road network and there are numbers of intersection in Surat city. The prime objective of traffic signal control is to minimize vehicular conflict and delay. Speed is inversely ...
  • Compensative Review Approach on Glaucoma Detection Techniques 
    Patel, Vibhuti; Chaudhari, Donika (International Journal of Innovative Research in Science, Engineering and Technology | Volume-8 | Issue-12, 2019-12)
    There are several papers are available on different types for glaucoma detection. Here we are trying to understand possible some techniques and try to represent compensative approach on different detection techniques such ...
  • PV, Battery and Ultra-capacitor based Energy Management Concept in Electric Vehicle 
    Parmar, Chirag; Gajjar, Rital (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-03)
    Electrical Vehicle (EVs) have recently attracted considerable attention and so did the development of battery technologies. Although the battery technology has been significantly advanced, the available batteries do not ...
  • Influence of Chemical Admixture on Marine Soil 
    Solanki, Manisha; Kamdar, Bhoomi; Shah, Manish (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-3, 2019-03)
    When soil looses the moisture content below the ground, it is create the volume reduction in the soil and cause the shrinkage cracks on the soil surface. This condition creates moderate to several problematic damage to the ...
  • Review of Formal Development of Lobst Method 
    Purohit, Aalap H.; Phugat, Sumit; Upadhaya, D. S. (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    This paper reports one aspect of a Repetitive Scheduling Method (RSM) or Line of Balance Scheduling Technique (LOBST) applied for a housing project having project activities repetitive in nature. These scheduling methods ...

Search DSpace


Advanced Search

Browse

My Account