Browsing 2020 by Title

Sort by: Order: Results:

  • Machine learning based stochastic dynamic analysis of functionally graded shells 
    Vaishali; Mukhopadhyay, T; Karsh, P. K.; Basu, B.; Dey, S (Composite Structures | Volume 237, 2020)
    This paper presents stochastic dynamic characterization of functionally graded shells based on an efficient Support Vector Machine assisted finite element (FE) approach. Different shell geometries such as cylindrical, ...
  • MATLAB Simulation and HDL Implementation of DVB-S2 Modulator 
    Brahmbhatt, Dhwani; Parmar, Yogesh (International Journal of Innovative Technology and Exploring Engineering | Volume-9 | Issue-5, 2020-03)
    Ongoing improvements in the region of satellite communication are making conceivable minimal effort information transmission and TV broadcasting to gently populated zones spread over a huge environmental district. As a ...
  • Methods to Handle Multiclass Imbalance Data in Educational Data Mining 
    Anjaria, Bhasha; Gandhi, Ankita; Gandhi, Jay (International Journal of Engineering and Advanced Technology | Volume-9 | Issue-4, 2020-04)
    In Scientists ordinarily exclude the equalization of the dissemination on a dataset in Educational Data Mining (EDM). It can truly influence the consequence of the classification procedure. Hypothetically, the distribution ...
  • Model Reduction Techniques with RBE2 and RBE3 Connection for Structural Results of Handling/Lifting Fixtures for Satellite Payloads 
    Gohil, Komal; Trivedi, Snehal; Prajapati, Rakesh (International Journal of Recent Technology and Engineering (IJRTE) | Volume-8 | Issue-6, 2020-03)
    A fixture is design to hold, support and locate every component with accuracy. Fixture design is very important step for the setup-planning phase. The present work aims to get proper result with accurate connection of the ...
  • NLP based Extraction of Relevant Resume using Machine Learning 
    Bhaliya, Nirali; Gandhi, Jay; Singh, Dheeraj Kumar (International Journal of Innovative Technology and Exploring Engineering (IJITEE) | Volume-9 | Issue-7, 2020-05)
    Today, the proportion of bits of knowledge making is incredibly tremendous. Dependent upon the adjustments of estimations, immense information involves social Data, machine data, and trade-based Data. Social estimations ...
  • Novel Class Detection with Concept Drift in Data Stream - AhtNODE 
    Gandhi, Jay; Gandhi, Vaibhav (International Journal of Distributed Systems and Technologies (IJDST) | Volume 11 | Issue 1, 2020)
    Data stream mining has become an interesting analysis topic and it is a growing interest in data discovery method. There are several applications supporting stream data processing like device network, electronic network, ...
  • Optimal Relay Coordination for IEEE 9 Bus system by Using Optimal Technique 
    Shah, Mayankkumar; Mehta, Nirali; Panchal, Komal (Journal of Information and Computational Science | Volume-10 | Issue-7, 2020)
    For the optimised co-ordination of Over current (OC) relays using this Optimal techniques such as easiest in which i have 2 phase easiest and dual easiest are used. Second way of optimal coordination program is using AI ...
  • Optimization of Process Parameters on Ceramic by Abrasive Jet Machining. 
    Bandhania, Gaurav P; Padhiyar, Mehul S; Anadani, Pankaj; Parikh, Maulesh (The International journal of analytical and experimental modal analysis | Volume-12 | Issue-6, 2020-06)
    In this present work, fabrication of abrasive jet machining (AJM) setup and parametric study of various process parameters in AJM setup have been carried out.Main important output response ismaterial removal rate (MRR) ...
  • Performance and Emission Parameters with Blending of Jatropha Biodiesel in Diesel Engine 
    Gupta, Ravindra; Vashi, Omkamal; Bhatt, Vaibhav (International Journal of Recent Technology and Engineering (IJRTE) | Volume-8 | Issue-5, 2020-01)
    In the current situation limited resources of petroleum products and their higher consumption rate and pollution increase research work for an alternative option for internal combustion engines. The emissions draws from ...
  • Radial Basis Function-Based Stochastic Natural Frequencies Analysis of Functionally Graded Plates 
    Karsh, P. K.; Kumar, R. R.; Dey, S. (International Journal of Computational Methods | Volume 17 | Issue 9, 2020)
    This paper deals with portraying the stochastic natural frequencies of cantilever plates made up of functionally graded materials (FGMs) by employing the radial basis function (RBF)-based finite element (FE) approach. The ...
  • Reduction of Test Time using Multiple Test Control Point Insertion for 7nm Technology Node 
    Patel, Maharshi; Parmar, Yogesh; Suthar, Haresh (International Journal of Innovative Technology and Exploring Engineering (IJITEE) | Volume-9 | Issue-5, 2020-03)
    Test time reduction is a prominent challenge in scan based Design For Testability (DFT) architectures for cost effective test. Reliability and testability both are main objectives for DFT in today’s VLSI design. In this ...
  • RELIABILITY, SAFETY AND MAINTENANCE OF INDUSTRIAL ROBOTS A REVIEW 
    Makvana, Vishal; Khatri, Sahil; Parmar, Shailesh; Parikh, Rakshit; avashiya, Yash (IJTIMES | Volume-6 | Issue-1, 2020-01)
    This paper presents a review of published literature on robot reliability, safety and maintenance. The literature is studied in three categories like robot safety, robot reliability and miscellaneous. Q robot has to be ...
  • Review on Counter Measures for Scouring Around the Bridge Pier 
    Patel, Kuldeep; Nath, Snehansu (International Journal of Recent Technology and Engineering | Volume-9 | Issue-4, 2020-09)
    Bridge pier as a crucial part of a bridge is used for various marine and transportation purposes. Local scouring around the bridge pier is a prominent cause which leads to the failure of the bridge system. scouring around ...
  • Reviewing Some Properties of Ultra High Performance Concrete 
    Mishra, Shweta; Mistry, Renisha (International Journal of Engineering Research & Technology | Volume-9 | Issue-6, 2020-06)
    This paper, a comprehensive literature review has been conducted to highlight the manufacturing principles and properties of UHPC. The affluent production of UHPC depends upon its compositional materials, water to binder ...
  • ROTATIONAL FRICTION WELDING A REVIEW PAPER 
    Makvana, Vishal; Shah, Milin; Mahant, Jayesh; Choudhary, Amit Mukund; Savalia, Dainik (IJRAR | Volume-7 | Issue-2, 2020-06)
    Friction welding is a non-conventional force welding process It is well-thought-out most viable alternative to overwhelmed the difficulties faced in conventional connection technique. Mostly used for joining material with ...
  • Stochastic Oblique Impact on Composite Laminates: A Concise Review and Characterization of the Essence of Hybrid Machine Learning Algorithms 
    Mukhopadhyay, T.; Naskar, S.; Chakraborty, S.; Karsh, P. K.; Choudhury, R.; Dey, S. (Archives of Computational Methods in Engineering | Volume- Issue-, 2020)
    Due to the absence of adequate control at different stages of complex manufacturing process, material and geometric properties of composite structures are often uncertain. For a secure and safe design, tracking the impact ...
  • A Structure for Semantic Image Retrieval Using Low Level Attribute and Image Annotation 
    Jasoliya, Ankit; Soni, Nidhi (International Journal for Innovative Research in Multidisciplinary Field | Volume-6 | Issue-7, 2020-07)
    The information retrieval is one of the most frequent techniques or application in our daily life for data search in different formats and kinds. In this presented work the image based data retrieval technique is investigated ...
  • WATER TREATMENT BY DOMESTIC LEVEL RO WATER PURIFIER AND ITS IMPACT ON HUMAN HEALTH 
    MARFATIA, SRUSTI; PATEL, JAMES; MODI, PARTH (International Journal of Creative Research Thoughts | Volume-8 | Issue-6, 2020)
    The aim of study is to check effectiveness of domestic level reverse osmosis (RO) water purifier by doing Physical and chemical assessment of water and correlate it with human health. The present work describes chemical ...
  • Weight Optimization of Bed for Heavy Duty CNC Lathe Machine MGX200 using FEM 
    Modhavadiya, Haresh; Prajapati, Rakesh; Goyal, Bhupesh (International Journal of Engineering and Advanced Technology (IJEAT) | Volume-9 | Issue-4, 2020-04)
    In this paper, MGX200 CNC Lathe bed selected for the complete static and vibration analysis. The examination work completed to lessen the heaviness of bed without break its basic inflexibility and the precision of the ...
  • WHEELCHAIR CONTROL BY EYES MOVEMENT AND VOICE RECOGNITION 
    Patel, Roma; Parikh, Ravi A; Patel, Mitul M (International Journal of Research and Analytical Reviews | Volume-7 | Issue-1, 2020-03)
    Statistics suggests that there are 11,000 new cases of quadriplegia every year in United States of America. Great people like Stephen Hawking and Max Brito have been suffering from this crippling phenomenon. It is an ...

Search DSpace


Advanced Search

Browse

My Account