Design and Optimization of Rear axle Gears for Commercial Vehicles

Barot, Kaushal.K; Barot, Ronak .K

dc.contributor.author	Barot, Kaushal.K
dc.contributor.author	Barot, Ronak .K
dc.date.accessioned	2020-11-10T09:18:45Z
dc.date.available	2020-11-10T09:18:45Z
dc.date.issued	2017-06
dc.identifier.issn	2319 - 4847
dc.identifier.uri	http://ir.paruluniversity.ac.in:8080/xmlui/handle/123456789/7599
dc.description.abstract	This research addresses responses of single stage hypoid rear axle gears to geometrical analysis and optimization. The entire analysis is done for single stage hypoid rear axle gears .The method used is Finite element modeling by using ANSYS 12.1 and analysis for which the inputs are obtained from gear standard ANSI/AGMA 2005-D03.The responses to geometrical analysis of hypoid gear caused by stress levels are determined .Components which are much affected by the running and loadingconditions are identified. Taguchi optimization method is used for hypoid gear to increase efficiency and life of it. Finally conclusions based on results and recommendations which can be extensions of this research are also presented.	en_US
dc.language.iso	en	en_US
dc.publisher	International Journal of Application or Innovation in Engineering & Management (IJAIEM) \| Volume-6 \| Issue-6	en_US
dc.subject	Hypoid gear	en_US
dc.subject	Geometrical analysis	en_US
dc.subject	optimization	en_US
dc.subject	ANSYS	en_US
dc.subject	AGMA	en_US
dc.subject	Taguchi	en_US
dc.title	Design and Optimization of Rear axle Gears for Commercial Vehicles	en_US
dc.type	Article	en_US