Faculty of Engineering & Technology: Recent submissions

  • A Review on Fly Ash Disposal, Utilization & Characterization 
    Prajapati, Krutika (International Journal of Engineering Development and Research | Volume-7 | Issue-3, 2019)
    Current annual production of fly ash, a byproduct from coal based thermal power plant (TPPS) is 131 million tonnes (MT).some of the problems associated with fly ash are large area of land required for disposal and toxicity ...
  • Numerical Analysis of The Slope By GEO5 
    Patel, Ekta; Kamdar, Bhoomi; Joshi, Nitin (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-3, 2019-03)
    failure of the slope often costs lives as well as property. Numerical simulation performed with GEO 5 software to know the influence of anchor for slope stability by traditional Limit Equilibrium method; Bishop’s method. ...
  • Comparative Study Of Conventional Retaining Wall And Mechanically Stabilized Earth Wall Using Plaxis 2d 
    Qureshi, Naved; Patel, Arpita; Kamdar, Bhoomi (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-4, 2019-04)
    Mechanically Stabilized Earth (MSE) wall system is retention system used for highway design. In conventional system, cast in place concrete structure is used that cannot accommodate significant differential settlement ...
  • Solar power technologies, refrigeration and cooling systems – review 
    Dadi, Mohsin J.; Vyas, Arjun K.; Sodha, Dhaval R. (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-1, 2019-01)
    Energy is the heart of the modern world. This paper provides a detailed review of solar photovoltaic and concentrated solar power technologies. The status of solar photovoltaic technology being commercially developed, ...
  • A study on Campus-Friendly Solar Powered Electric Vehicle 
    Shukla, Gangesh; Raval, Karmit; Solanki, Dhruvi; Patel, Urvashi; Dave, Dhaval (International Research Journal of Engineering and Technology (IRJET) | Volume-6 | Issue-2, 2019-02)
    This paper presents a study on campus-friendly solar powered electric vehicle. Solar energy is one of the important sources of renewable energy which can be a feasible alternative to fossil fuels. On a bright sunny day the ...
  • Passenger Car Unit of Vehicles on Multilane Urban Roads: - A Case Study of Vadodara City 
    Thakkar, Parth S.; Gupte, Siddharth; Juremalani, Jayesh (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-5 | Issue-4, 2018-04)
    This paper presents a concept of Dynamic passenger car unit factor, appropriate for the heterogeneous traffic on Indian roads, and shows that the PCU factor for vehicles type is not a static factor as it is usually assumed. ...
  • Pedestrian Speed Analysis on Religious Event 
    Mistry, Sanket; Juremalani, Jayesh; Parekh, Vilin (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-5 | Issue-4, 2018-04)
    The present study has been performed to understand the variation in speed of pedestrian devotees during specific religious event. For the study "BAPS Shri Swaminarayan Mandir, Bharuch" has been selected as study area. The ...
  • Review on Parking Survey and Important Factors 
    Gandhi, Naitik; Juremalani, Jayesh (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    There are many downsides on traffic in our country however major downside of accelerating traffic jam is undisciplined parking tends to Parking Deficiency It increase Congestion. With the rise in variety of vehicles, the ...
  • A Review on Bus Route Optimization and Rescheduling 
    Patel, Snehal; Juremalani, Jayesh; Parekh, Vilin (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    Buses are the most widely utilized in transit technology these days due to the fact bus networks are easily handy and cheaper than other kinds of public transportation. Bus route problem is major challenge now a day because ...
  • A Review on GIS Based Approach of Surface Transport Network Analysis 
    Mahavar, Vaishali; Juremalani, Jayesh; Mehmood, Khalid (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    In India it is planned to develop all small and big cities as smart cities. For which proper planning of surface transport system is a primary requirement. Modern technology is to be adopted for connecting internal roads ...
  • Review on Performance Enhancement of Mastic Asphalt Mix Using Suitable Modifier 
    Gadhavi, Kajal; Juremalani, Jayesh (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    Mastic asphalt is a gap graded asphalt mixture which can be used in surface layer of high volume pavements, wearing surface for bridge decks, etc…. Due to recent problem of pavement failure at intersection, bridge deck, ...
  • Review Of Temperature Effect On Pavement By Falling Weight Deflectometer (FWD) 
    Garasia, Kevin; Juremalani, Jayesh (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    FWD is used to evaluate the physical properties of the pavement. FWD is primarily used to estimate pavement structural capacity for overlay design and to determine, if a pavement is being overloaded. The equipment is highly ...
  • Experimental Analysis of Evacuated Tube Solar Water Heater Using Twisted Tape 
    Keen, Vikas Immanuel; Prajapati, Swati (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-5 | Issue-12, 2018-12)
    Alternative energy sources possess ample amount of energy which is available at free cost and it is pollution free too. The solar energy is one such energy which can be used for cooking, heating, for other household purposes ...
  • ROTATIONAL FRICTION WELDING A REVIEW PAPER 
    Makvana, Vishal; Shah, Milin; Mahant, Jayesh; Choudhary, Amit Mukund; Savalia, Dainik (IJRAR | Volume-7 | Issue-2, 2020-06)
    Friction welding is a non-conventional force welding process It is well-thought-out most viable alternative to overwhelmed the difficulties faced in conventional connection technique. Mostly used for joining material with ...
  • Parametric uncertainty quantification in natural frequency of sandwich plates using polynomial neural network 
    Karsh, P. K.; Raturi, H. P.; Kumar, R. R.; Dey, S. (National Conference on Advanced Materials and Applications | Volume- | Issue-, 2020)
    In this paper, uncertainty quantification in natural frequencies for laminated soft core sandwich plates is presented by employing finite element (FE) coupled polynomial neural network (PNN) approach. The computational ...
  • A Critical Appraisal of Mode Choice Model of Work Trips 
    Javeed, Faizi Ahmad; Jayeshn.R, Juremalani; Sanket, Bagadia; Dharmesh, Juremalani (International Journal of Engineering and Advanced Technology | Volume-9 | Issue-1, 2019-10)
    In the present scenario in world, many mode choice models have been developed to predict the travelers mode choice in the available modes of transportation system .The mode choice model is one of a very significantcomponent ...
  • Prediction model development for material removal rate in band sawing using dimensional analysis approach 
    Mewada, Bhavesh G.; Raval, Harit K. (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume 5 | Issue 12, 2018-12)
    Bandsawing is an accurate and fast process to cut various raw materials. Material removal rate (MRR) is the important parameter in bandsawing to judge its performance. To the best of knowledge of the author, almost none ...
  • Cost effective Parking System Using Computer Vision 
    Shah, Kaushal; Rajbhoi, Shivang; Prasad, Nikhil; Patel, Charmi; Raj, Roushan (International Journal of Scientific Research in Computer Science, Engineering and Information Technology | Volume-6 | Issue-2, 2020-04)
    This paper presents an approach for detecting real-time parking slots which includes vision-based techniques. Traditional sensor-based systems are not cost effective as 'n' number of sensors are required for 'n' parking ...
  • Green Energy Sources Selection for Sustainable Planning: A Case Study 
    Bhowmik, Chiranjib; Bhowmik, Sumit; Ray, Amitava (IEEE TRANSACTIONS ON ENGINEERING MANAGEMENT | Volume- | Issue-, 2020-01)
    The aim of this article is to select the optimum green energy sources for sustainable planning for a region. This research presents an integrated model based on theoretical base of benefit, opportunities, costs, risks ...
  • WHEELCHAIR CONTROL BY EYES MOVEMENT AND VOICE RECOGNITION 
    Patel, Roma; Parikh, Ravi A; Patel, Mitul M (International Journal of Research and Analytical Reviews | Volume-7 | Issue-1, 2020-03)
    Statistics suggests that there are 11,000 new cases of quadriplegia every year in United States of America. Great people like Stephen Hawking and Max Brito have been suffering from this crippling phenomenon. It is an ...

Search DSpace


Advanced Search

Browse

My Account