Parul University Digital Repository

Browsing Faculty of Engineering & Technology by Title

Browsing Faculty of Engineering & Technology by Title

Sort by: Order: Results:

  • Pedestrian Speed Analysis on Religious Event 
    Mistry, Sanket; Juremalani, Jayesh; Parekh, Vilin (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-5 | Issue-4, 2018-04)
    The present study has been performed to understand the variation in speed of pedestrian devotees during specific religious event. For the study "BAPS Shri Swaminarayan Mandir, Bharuch" has been selected as study area. The ...
  • Performance and Emission Parameters with Blending of Jatropha Biodiesel in Diesel Engine 
    Gupta, Ravindra; Vashi, Omkamal; Bhatt, Vaibhav (International Journal of Recent Technology and Engineering (IJRTE) | Volume-8 | Issue-5, 2020-01)
    In the current situation limited resources of petroleum products and their higher consumption rate and pollution increase research work for an alternative option for internal combustion engines. The emissions draws from ...
  • Prediction model development for material removal rate in band sawing using dimensional analysis approach 
    Mewada, Bhavesh G.; Raval, Harit K. (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume 5 | Issue 12, 2018-12)
    Bandsawing is an accurate and fast process to cut various raw materials. Material removal rate (MRR) is the important parameter in bandsawing to judge its performance. To the best of knowledge of the author, almost none ...
  • Production of electricity by small scale vertical axis wind turbine (vawt) and solar plate on highways and railway junctions 
    Patel, Parth; Khare, Manjeet; Parmar, Smit; Parmar, Nishant; Lad, Hardik (JETIR | Volume-6 | Issue-3, 2019-03)
    In this paper the creation of model of Savonius type Vertical Axis Wind Turbine (VAWT) is made utilizing materials which are effectively accessible like half cut shaped metal sheet, dc generator, solar plate, and so forth. ...
  • PV, Battery and Ultra-capacitor based Energy Management Concept in Electric Vehicle 
    Parmar, Chirag; Gajjar, Rital (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-03)
    Electrical Vehicle (EVs) have recently attracted considerable attention and so did the development of battery technologies. Although the battery technology has been significantly advanced, the available batteries do not ...
  • Radial Basis Function-Based Stochastic Natural Frequencies Analysis of Functionally Graded Plates 
    Karsh, P. K.; Kumar, R. R.; Dey, S. (International Journal of Computational Methods | Volume 17 | Issue 9, 2020)
    This paper deals with portraying the stochastic natural frequencies of cantilever plates made up of functionally graded materials (FGMs) by employing the radial basis function (RBF)-based finite element (FE) approach. The ...
  • Reduction of Test Time using Multiple Test Control Point Insertion for 7nm Technology Node 
    Patel, Maharshi; Parmar, Yogesh; Suthar, Haresh (International Journal of Innovative Technology and Exploring Engineering (IJITEE) | Volume-9 | Issue-5, 2020-03)
    Test time reduction is a prominent challenge in scan based Design For Testability (DFT) architectures for cost effective test. Reliability and testability both are main objectives for DFT in today’s VLSI design. In this ...
  • RELIABILITY, SAFETY AND MAINTENANCE OF INDUSTRIAL ROBOTS A REVIEW 
    Makvana, Vishal; Khatri, Sahil; Parmar, Shailesh; Parikh, Rakshit; avashiya, Yash (IJTIMES | Volume-6 | Issue-1, 2020-01)
    This paper presents a review of published literature on robot reliability, safety and maintenance. The literature is studied in three categories like robot safety, robot reliability and miscellaneous. Q robot has to be ...
  • Review of Formal Development of Lobst Method 
    Purohit, Aalap H.; Phugat, Sumit; Upadhaya, D. S. (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    This paper reports one aspect of a Repetitive Scheduling Method (RSM) or Line of Balance Scheduling Technique (LOBST) applied for a housing project having project activities repetitive in nature. These scheduling methods ...
  • Review of Lean Tools Application in Reduction of Throughput Time of Current Transformer 
    Kulkarni, Pavan; Tomar, Prashantsingh; khanna, Prashant (JETIR | Volume-6 | Issue-3, 2019-03)
    Lean concept has existed since the late 1970s. From right off the bat, numerous organizations in industrialized nations connected lean concept more viably than others. Fruitful Lean execution is regularly ascribed to ...
  • Review Of Temperature Effect On Pavement By Falling Weight Deflectometer (FWD) 
    Garasia, Kevin; Juremalani, Jayesh (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    FWD is used to evaluate the physical properties of the pavement. FWD is primarily used to estimate pavement structural capacity for overlay design and to determine, if a pavement is being overloaded. The equipment is highly ...
  • A Review on Bus Route Optimization and Rescheduling 
    Patel, Snehal; Juremalani, Jayesh; Parekh, Vilin (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    Buses are the most widely utilized in transit technology these days due to the fact bus networks are easily handy and cheaper than other kinds of public transportation. Bus route problem is major challenge now a day because ...
  • Review on Counter Measures for Scouring Around the Bridge Pier 
    Patel, Kuldeep; Nath, Snehansu (International Journal of Recent Technology and Engineering | Volume-9 | Issue-4, 2020-09)
    Bridge pier as a crucial part of a bridge is used for various marine and transportation purposes. Local scouring around the bridge pier is a prominent cause which leads to the failure of the bridge system. scouring around ...
  • A Review on Fly Ash Disposal, Utilization & Characterization 
    Prajapati, Krutika (International Journal of Engineering Development and Research | Volume-7 | Issue-3, 2019)
    Current annual production of fly ash, a byproduct from coal based thermal power plant (TPPS) is 131 million tonnes (MT).some of the problems associated with fly ash are large area of land required for disposal and toxicity ...
  • A Review on GIS Based Approach of Surface Transport Network Analysis 
    Mahavar, Vaishali; Juremalani, Jayesh; Mehmood, Khalid (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    In India it is planned to develop all small and big cities as smart cities. For which proper planning of surface transport system is a primary requirement. Modern technology is to be adopted for connecting internal roads ...
  • Review on Parking Survey and Important Factors 
    Gandhi, Naitik; Juremalani, Jayesh (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    There are many downsides on traffic in our country however major downside of accelerating traffic jam is undisciplined parking tends to Parking Deficiency It increase Congestion. With the rise in variety of vehicles, the ...
  • Review on Performance Enhancement of Mastic Asphalt Mix Using Suitable Modifier 
    Gadhavi, Kajal; Juremalani, Jayesh (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    Mastic asphalt is a gap graded asphalt mixture which can be used in surface layer of high volume pavements, wearing surface for bridge decks, etc…. Due to recent problem of pavement failure at intersection, bridge deck, ...
  • A review on various insertion techniques in double pipe heat exchanger 
    Chimta, Panahali; Khare, Manjeet; Khan, Shadab; Khan, Farhan; Tomar, Prashant Singh (JETIR | Volume-6 | Issue-3, 2019-03)
    The authors studied various techniques that promoted heat transfer rate and to decrease size and cost of equipment of heat exchanger to upgrade the heat transfer rate. One the most important tool used in passive heat ...
  • A review paper on use of recycled concrete aggregate in concrete 
    Ghanchibhai, Salman F.; Rasoolbhai, Iliyas U.; Pandya, Tejas H. (JETIR | Volume-6 | Issue-3, 2019-03)
    Concrete is widely used material in construction of infrastructures like building, dams, bridges ,roads ,runway etc. In present day construction industry having big role in pollution of environment. Different materials are ...
  • Reviewing Some Properties of Ultra High Performance Concrete 
    Mishra, Shweta; Mistry, Renisha (International Journal of Engineering Research & Technology | Volume-9 | Issue-6, 2020-06)
    This paper, a comprehensive literature review has been conducted to highlight the manufacturing principles and properties of UHPC. The affluent production of UHPC depends upon its compositional materials, water to binder ...

Search DSpace


Advanced Search

Browse

My Account