Parul University Digital Repository

Browsing Faculty of Engineering & Technology by Title

Browsing Faculty of Engineering & Technology by Title

Sort by: Order: Results:

  • Nano Mullite Bonded Refractory Castable Composition for High Temperature Applications 
    Singh, Akhilesh Kumar; Sarkar, Ritwik (Ceramics International Volume 42 | Issue 11, 2016-08)
    Development of high pure alumina castable is studied by using synthesized mullite sol as the sole binder. Mullite sol is prepared by wet chemical route and is characterized by its solid content, particle size, thermal ...
  • NLP based Extraction of Relevant Resume using Machine Learning 
    Bhaliya, Nirali; Gandhi, Jay; Singh, Dheeraj Kumar (International Journal of Innovative Technology and Exploring Engineering (IJITEE) | Volume-9 | Issue-7, 2020-05)
    Today, the proportion of bits of knowledge making is incredibly tremendous. Dependent upon the adjustments of estimations, immense information involves social Data, machine data, and trade-based Data. Social estimations ...
  • Novel Class Detection with Concept Drift in Data Stream - AhtNODE 
    Gandhi, Jay; Gandhi, Vaibhav (International Journal of Distributed Systems and Technologies (IJDST) | Volume 11 | Issue 1, 2020)
    Data stream mining has become an interesting analysis topic and it is a growing interest in data discovery method. There are several applications supporting stream data processing like device network, electronic network, ...
  • Numerical Analysis of The Slope By GEO5 
    Patel, Ekta; Kamdar, Bhoomi; Joshi, Nitin (International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) | Volume-5 | Issue-3, 2019-03)
    failure of the slope often costs lives as well as property. Numerical simulation performed with GEO 5 software to know the influence of anchor for slope stability by traditional Limit Equilibrium method; Bishop’s method. ...
  • ON-STREET PARKING PROBLEMS IN CBD AREA & REMEDIEL MEASURES-A CASE STUDY OF GODHRA CITY 
    Gandhi, Naitik; Juremalani, Jayesh (International Journal of Civil Engineering and Technology (IJCIET) | Volume 10 | Issue 03, 2019-03)
    The unprecedented growth of vehicles has increased parking space demand into cities. It has a considerable effect on transportation development in the city. The availability of less space in urban areas has rising demand ...
  • Optimal green energy source selection: An eclectic decision 
    Bhowmik, Chiranjib; Bhowmik, Sumit; Ray, Amitava (Energy & Environment | Volume 31 | Issue 5, 2019-10)
    Various researchers have suggested many qualitative and quantitative criteria for green energy management, which are mostly operational in nature and specific to a particular application. The main aim of this investigation ...
  • Optimal Relay Coordination for IEEE 9 Bus system by Using Optimal Technique 
    Shah, Mayankkumar; Mehta, Nirali; Panchal, Komal (Journal of Information and Computational Science | Volume-10 | Issue-7, 2020)
    For the optimised co-ordination of Over current (OC) relays using this Optimal techniques such as easiest in which i have 2 phase easiest and dual easiest are used. Second way of optimal coordination program is using AI ...
  • Optimization of Process Parameters on Ceramic by Abrasive Jet Machining. 
    Bandhania, Gaurav P; Padhiyar, Mehul S; Anadani, Pankaj; Parikh, Maulesh (The International journal of analytical and experimental modal analysis | Volume-12 | Issue-6, 2020-06)
    In this present work, fabrication of abrasive jet machining (AJM) setup and parametric study of various process parameters in AJM setup have been carried out.Main important output response ismaterial removal rate (MRR) ...
  • Parametric analysis for the development of copper silicon Carbide metal matrix composites using stir casting 
    Goyal, Bhupesh; Basak, Deepjyoti; Vyas, Arjun; Sodha, Dhavalsinh; Khanna, Prashant (GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES | Volume-6 | Issue-6, 2019-06)
    Smart materials are in picture due to the requirement of light weight and high strength material having good mechanical properties for different application. Copper material composite acquire all the requirement properties ...
  • Parametric Analysis of Solar Thermal System 
    Patel, Niraj J.; Khiraiya, Krunal B.; Parmar, Kamlesh R.; Patel, Sandip K. (IJSRD - International Journal for Scientific Research & Development | Volume-5 | Issue-5, 2017)
    The Solar thermal training system is project on solar water heating system. Here heating of water with help of solar in Any Season can be obtained. Here in the season of rainy days also heated water can be obtained with ...
  • Parametric uncertainty quantification in natural frequency of sandwich plates using polynomial neural network 
    Karsh, P. K.; Raturi, H. P.; Kumar, R. R.; Dey, S. (National Conference on Advanced Materials and Applications | Volume- | Issue-, 2020)
    In this paper, uncertainty quantification in natural frequencies for laminated soft core sandwich plates is presented by employing finite element (FE) coupled polynomial neural network (PNN) approach. The computational ...
  • Partial Ground Anchored Cable Stayed Bridge with Crossing Stay Cables 
    Patel, Biral; Doiphode, Ganesh; Kannauzia, Anil (International Education & Research Journal [IERJ] | Volume-3 | Issue-5, 2017-05)
    As the span of conventional cable stayed bridge crosses 1000 m or longer, a horizontal force component of stay cables causes large amount of axial pressure in girder, which leads an increase of girder dimension and height ...
  • Passenger Car Unit of Vehicles on Multilane Urban Roads: - A Case Study of Vadodara City 
    Thakkar, Parth S.; Gupte, Siddharth; Juremalani, Jayesh (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-5 | Issue-4, 2018-04)
    This paper presents a concept of Dynamic passenger car unit factor, appropriate for the heterogeneous traffic on Indian roads, and shows that the PCU factor for vehicles type is not a static factor as it is usually assumed. ...
  • Pedestrian Speed Analysis on Religious Event 
    Mistry, Sanket; Juremalani, Jayesh; Parekh, Vilin (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-5 | Issue-4, 2018-04)
    The present study has been performed to understand the variation in speed of pedestrian devotees during specific religious event. For the study "BAPS Shri Swaminarayan Mandir, Bharuch" has been selected as study area. The ...
  • Performance and Emission Parameters with Blending of Jatropha Biodiesel in Diesel Engine 
    Gupta, Ravindra; Vashi, Omkamal; Bhatt, Vaibhav (International Journal of Recent Technology and Engineering (IJRTE) | Volume-8 | Issue-5, 2020-01)
    In the current situation limited resources of petroleum products and their higher consumption rate and pollution increase research work for an alternative option for internal combustion engines. The emissions draws from ...
  • Prediction model development for material removal rate in band sawing using dimensional analysis approach 
    Mewada, Bhavesh G.; Raval, Harit K. (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume 5 | Issue 12, 2018-12)
    Bandsawing is an accurate and fast process to cut various raw materials. Material removal rate (MRR) is the important parameter in bandsawing to judge its performance. To the best of knowledge of the author, almost none ...
  • Production of electricity by small scale vertical axis wind turbine (vawt) and solar plate on highways and railway junctions 
    Patel, Parth; Khare, Manjeet; Parmar, Smit; Parmar, Nishant; Lad, Hardik (JETIR | Volume-6 | Issue-3, 2019-03)
    In this paper the creation of model of Savonius type Vertical Axis Wind Turbine (VAWT) is made utilizing materials which are effectively accessible like half cut shaped metal sheet, dc generator, solar plate, and so forth. ...
  • PV, Battery and Ultra-capacitor based Energy Management Concept in Electric Vehicle 
    Parmar, Chirag; Gajjar, Rital (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-03)
    Electrical Vehicle (EVs) have recently attracted considerable attention and so did the development of battery technologies. Although the battery technology has been significantly advanced, the available batteries do not ...
  • Radial Basis Function-Based Stochastic Natural Frequencies Analysis of Functionally Graded Plates 
    Karsh, P. K.; Kumar, R. R.; Dey, S. (International Journal of Computational Methods | Volume 17 | Issue 9, 2020)
    This paper deals with portraying the stochastic natural frequencies of cantilever plates made up of functionally graded materials (FGMs) by employing the radial basis function (RBF)-based finite element (FE) approach. The ...
  • Reduction of Test Time using Multiple Test Control Point Insertion for 7nm Technology Node 
    Patel, Maharshi; Parmar, Yogesh; Suthar, Haresh (International Journal of Innovative Technology and Exploring Engineering (IJITEE) | Volume-9 | Issue-5, 2020-03)
    Test time reduction is a prominent challenge in scan based Design For Testability (DFT) architectures for cost effective test. Reliability and testability both are main objectives for DFT in today’s VLSI design. In this ...

Search DSpace


Advanced Search

Browse

My Account