Parul University Digital Repository

Browsing Faculty of Engineering & Technology by Title

Browsing Faculty of Engineering & Technology by Title

Sort by: Order: Results:

  • Parametric analysis for the development of copper silicon Carbide metal matrix composites using stir casting 
    Goyal, Bhupesh; Basak, Deepjyoti; Vyas, Arjun; Sodha, Dhavalsinh; Khanna, Prashant (GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES | Volume-6 | Issue-6, 2019-06)
    Smart materials are in picture due to the requirement of light weight and high strength material having good mechanical properties for different application. Copper material composite acquire all the requirement properties ...
  • Parametric Analysis of Solar Thermal System 
    Patel, Niraj J.; Khiraiya, Krunal B.; Parmar, Kamlesh R.; Patel, Sandip K. (IJSRD - International Journal for Scientific Research & Development | Volume-5 | Issue-5, 2017)
    The Solar thermal training system is project on solar water heating system. Here heating of water with help of solar in Any Season can be obtained. Here in the season of rainy days also heated water can be obtained with ...
  • Parametric uncertainty quantification in natural frequency of sandwich plates using polynomial neural network 
    Karsh, P. K.; Raturi, H. P.; Kumar, R. R.; Dey, S. (National Conference on Advanced Materials and Applications | Volume- | Issue-, 2020)
    In this paper, uncertainty quantification in natural frequencies for laminated soft core sandwich plates is presented by employing finite element (FE) coupled polynomial neural network (PNN) approach. The computational ...
  • Partial Ground Anchored Cable Stayed Bridge with Crossing Stay Cables 
    Patel, Biral; Doiphode, Ganesh; Kannauzia, Anil (International Education & Research Journal [IERJ] | Volume-3 | Issue-5, 2017-05)
    As the span of conventional cable stayed bridge crosses 1000 m or longer, a horizontal force component of stay cables causes large amount of axial pressure in girder, which leads an increase of girder dimension and height ...
  • Passenger Car Unit of Vehicles on Multilane Urban Roads: - A Case Study of Vadodara City 
    Thakkar, Parth S.; Gupte, Siddharth; Juremalani, Jayesh (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-5 | Issue-4, 2018-04)
    This paper presents a concept of Dynamic passenger car unit factor, appropriate for the heterogeneous traffic on Indian roads, and shows that the PCU factor for vehicles type is not a static factor as it is usually assumed. ...
  • Pedestrian Speed Analysis on Religious Event 
    Mistry, Sanket; Juremalani, Jayesh; Parekh, Vilin (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume-5 | Issue-4, 2018-04)
    The present study has been performed to understand the variation in speed of pedestrian devotees during specific religious event. For the study "BAPS Shri Swaminarayan Mandir, Bharuch" has been selected as study area. The ...
  • Performance and Emission Parameters with Blending of Jatropha Biodiesel in Diesel Engine 
    Gupta, Ravindra; Vashi, Omkamal; Bhatt, Vaibhav (International Journal of Recent Technology and Engineering (IJRTE) | Volume-8 | Issue-5, 2020-01)
    In the current situation limited resources of petroleum products and their higher consumption rate and pollution increase research work for an alternative option for internal combustion engines. The emissions draws from ...
  • Prediction model development for material removal rate in band sawing using dimensional analysis approach 
    Mewada, Bhavesh G.; Raval, Harit K. (Journal of Emerging Technologies and Innovative Research (JETIR) | Volume 5 | Issue 12, 2018-12)
    Bandsawing is an accurate and fast process to cut various raw materials. Material removal rate (MRR) is the important parameter in bandsawing to judge its performance. To the best of knowledge of the author, almost none ...
  • Production of electricity by small scale vertical axis wind turbine (vawt) and solar plate on highways and railway junctions 
    Patel, Parth; Khare, Manjeet; Parmar, Smit; Parmar, Nishant; Lad, Hardik (JETIR | Volume-6 | Issue-3, 2019-03)
    In this paper the creation of model of Savonius type Vertical Axis Wind Turbine (VAWT) is made utilizing materials which are effectively accessible like half cut shaped metal sheet, dc generator, solar plate, and so forth. ...
  • PV, Battery and Ultra-capacitor based Energy Management Concept in Electric Vehicle 
    Parmar, Chirag; Gajjar, Rital (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-03)
    Electrical Vehicle (EVs) have recently attracted considerable attention and so did the development of battery technologies. Although the battery technology has been significantly advanced, the available batteries do not ...
  • Radial Basis Function-Based Stochastic Natural Frequencies Analysis of Functionally Graded Plates 
    Karsh, P. K.; Kumar, R. R.; Dey, S. (International Journal of Computational Methods | Volume 17 | Issue 9, 2020)
    This paper deals with portraying the stochastic natural frequencies of cantilever plates made up of functionally graded materials (FGMs) by employing the radial basis function (RBF)-based finite element (FE) approach. The ...
  • Reduction of Test Time using Multiple Test Control Point Insertion for 7nm Technology Node 
    Patel, Maharshi; Parmar, Yogesh; Suthar, Haresh (International Journal of Innovative Technology and Exploring Engineering (IJITEE) | Volume-9 | Issue-5, 2020-03)
    Test time reduction is a prominent challenge in scan based Design For Testability (DFT) architectures for cost effective test. Reliability and testability both are main objectives for DFT in today’s VLSI design. In this ...
  • RELIABILITY, SAFETY AND MAINTENANCE OF INDUSTRIAL ROBOTS A REVIEW 
    Makvana, Vishal; Khatri, Sahil; Parmar, Shailesh; Parikh, Rakshit; avashiya, Yash (IJTIMES | Volume-6 | Issue-1, 2020-01)
    This paper presents a review of published literature on robot reliability, safety and maintenance. The literature is studied in three categories like robot safety, robot reliability and miscellaneous. Q robot has to be ...
  • Review of Formal Development of Lobst Method 
    Purohit, Aalap H.; Phugat, Sumit; Upadhaya, D. S. (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    This paper reports one aspect of a Repetitive Scheduling Method (RSM) or Line of Balance Scheduling Technique (LOBST) applied for a housing project having project activities repetitive in nature. These scheduling methods ...
  • Review of Lean Tools Application in Reduction of Throughput Time of Current Transformer 
    Kulkarni, Pavan; Tomar, Prashantsingh; khanna, Prashant (JETIR | Volume-6 | Issue-3, 2019-03)
    Lean concept has existed since the late 1970s. From right off the bat, numerous organizations in industrialized nations connected lean concept more viably than others. Fruitful Lean execution is regularly ascribed to ...
  • Review Of Temperature Effect On Pavement By Falling Weight Deflectometer (FWD) 
    Garasia, Kevin; Juremalani, Jayesh (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    FWD is used to evaluate the physical properties of the pavement. FWD is primarily used to estimate pavement structural capacity for overlay design and to determine, if a pavement is being overloaded. The equipment is highly ...
  • A Review on Bus Route Optimization and Rescheduling 
    Patel, Snehal; Juremalani, Jayesh; Parekh, Vilin (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    Buses are the most widely utilized in transit technology these days due to the fact bus networks are easily handy and cheaper than other kinds of public transportation. Bus route problem is major challenge now a day because ...
  • Review on Counter Measures for Scouring Around the Bridge Pier 
    Patel, Kuldeep; Nath, Snehansu (International Journal of Recent Technology and Engineering | Volume-9 | Issue-4, 2020-09)
    Bridge pier as a crucial part of a bridge is used for various marine and transportation purposes. Local scouring around the bridge pier is a prominent cause which leads to the failure of the bridge system. scouring around ...
  • A Review on Fly Ash Disposal, Utilization & Characterization 
    Prajapati, Krutika (International Journal of Engineering Development and Research | Volume-7 | Issue-3, 2019)
    Current annual production of fly ash, a byproduct from coal based thermal power plant (TPPS) is 131 million tonnes (MT).some of the problems associated with fly ash are large area of land required for disposal and toxicity ...
  • A Review on GIS Based Approach of Surface Transport Network Analysis 
    Mahavar, Vaishali; Juremalani, Jayesh; Mehmood, Khalid (International Journal of Research and Analytical Reviews (IJRAR) | Volume-6 | Issue-1, 2019-01)
    In India it is planned to develop all small and big cities as smart cities. For which proper planning of surface transport system is a primary requirement. Modern technology is to be adopted for connecting internal roads ...

Search DSpace


Advanced Search

Browse

My Account